Fujitsu Primepower200 - Figure 11.11 Data Cartridge Write-Protection Tab

11.6 DLT Tape Drive
11.6.6 Write-protecting a data cartridge
Data cartridges have a write-protection tab to protect important data from being overwritten by mistake.
Read only
Write Enable
Orange indicator
Write-protection Tab
Figure 11.11 Data Cartridge Write-protection Tab
11.6.7 Loading a data cartridge
The following describes how to load data cartridges.
1 Check that the Operate Handle LED (green) is lit, and lift the cartridge handle up.
2 Push in the data cartridge straight into the DLT tape drive, making sure it is facing the right direction.
221