Fujitsu Primepower200 - Page 201

9.3 Preparations for Use
Table 9.3 Installation Specifications of the Expansion Disk Cabinet (2/2)
Unit
Top
Side
Service
Area
Side
Service
Area
Rear
Service
Area
Front
Service
Area
230 (W)
(9 in.)
630 (D)
(25 in.)
700 (H)
(28 in.)
478 (*1) (19 in.)
Unit Front Unit Side
Item Specification
800 (*4)
(32 in.)
800 (*4)
(32 in.)
800 (*3)
(32 in.)
800
(32 in.)
677
(27 in.)
Unit Dimensions
(units : mm)
Service Areas
(units : mm)
230
( 9 in. )
677 (*2) (27 in.)
*1: The unit width including the Stabilizing Feet is 478 mm (19-inch).
*2: The unit depth including the skirt is 677 mm (27-inch).
*3: If it is possible to move the Expansion Disk Cabinet so that 800 mm (32-inch) or more space is
available behind the unit when maintenance is performed, then 200mm (8-inch) of space is adequate
is normal use. However, if optical cables are used, at least 300mm (12-inch) of space will be needed
between the rear of the unit and the wall.
*4: If it is possible to move the Expansion Disk Cabinet so that 800mm (32-inch) or more space is
available beside the unit when maintenance is performed, then no space is required in normal use.
173