Fujitsu Primepower200 - Page 41

2.3 Preparations for Use
Table 2.3 Installation Specifications of the PRIMEPOWER200 Pedestal Server (2/2)
Unit
Top
Side
Service
Area
Side
Service
Area
Rear
Service
Area
Front
Service
Area
230 (W)
(9 in.)
644 (D)
(25 in.)
700 (H)
(28 in.)
478 (*1)
(19 in.)
Unit Front Unit Side
Item Specification
800 (*3)
(32 in.)
800 (*3)
(32 in.)
800 (*2)
(32 in.)
800
(32 in.)
657
(26 in.)
Unit Dimensions
(units : mm)
Service Areas
(units : mm)
230
( 9 in. )
657 (*1)
(26 in.)
*1: Including the Stabilizing Feet the width is 478 mm (19-inch) and the depth is 657mm (26-inch).
*2: If it is possible to move the Server Unit so that 800 mm (32-inch) or more space is available behind
the unit when maintenance is performed, then 200mm (8-inch) of space is adequate is normal use.
However, if optical cables are used, at least 300mm (12-inch) of space will be needed between the
rear of the Unit and the wall.
*3: If it is possible to move the Server Unit so that 800mm (32-inch) or more space is available beside
the Unit when maintenance is performed, then no space is required in normal use.
13