Fujitsu Primergy RX100 S2 User Manual

133
PRIMERGY RX100 S2 User’s Guide
1
2
3
4
5
6
7
9
8
Operations after OS Installation
■ Paging File Setting
Set up the paging file according to the following procedures:
1 Log on to the server with administrator privileges.
2 Check free space of the drive where the system is installed.
Check the required amount of free space according to "■ Checking Hard Disk Free Space"
(
pg.130). If the drive has no free space, refer to "■ Cannot Collect the Memory Dump"
(
pg.235).
3 Click [Start] → [Settings] → [Control Panel].
4 Double-click the [System] icon.
The [System Properties] window appears.
5 Click the [Advanced] tab and click [Performance Options].
The [Performance Options] window appears.
6 Click [Change] in the [Virtual memory] section.
The [Virtual Memory] window appears.

Fujitsu Primergy RX100 S2 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S2
Category	Server
Language	English