Fujitsu Primergy RX100 S2 - Page 215

215
PRIMERGY RX100 S2 User’s Guide
8
Hardware Configuration/Utilities
Baud Rate • 300
• 1200
• 2400
• 9600 (at the time of
purchase)
• 19.2K
• 38.4K
• 57.6K
• 115.2K
Sets the baud rate for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Protocol • VT100
• VT100, 8bit
• PC-ANSI, 7bit
•PC ANSI
• VT100+ (at the time of
purchase)
• VT-UTF8
Sets the console type for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Flow Control • None (at the time of
purchase)
• XON/XOFF
•CTS/RTS
Sets the flow control.
This item appears when [Console Redirection Port]
is set to [Enabled].
Mode • Standard
• Enhanced (at the time of
purchase)
Sets the range of use for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
table: Items on the Console Redirection Submenu
Item Setting Description