Fujitsu Primergy RX100 S2 User Manual

50
Chapter 2 Checking before OS Installation
8 Specify whether or not to copy the contents of the CD.
When you select [Yes] for "enable the use of ServerStart without CD.", you can start the
preconfiguration mode on the client computer without using the CD-ROM.
If you select [Yes], specify the target folder. The target folder must have enough free space to
copy the contents of the CD-ROM.
 On WindowsNT, the CD-ROM is not copied. You must click [No]. The ServerStart CD-ROM is
required to start ServerStart.
9 Click [Next].
Installation is executed.
 If a message prompting you to restart the system appears before or after installation, eject the
CD-ROM and restart the system according to the message. When the system restarts, insert
the ServerStart CD-ROM and start installation again.
If like the following message "This program stops responding." appears during startup, click
[Exit] to continue the restart operation.
When the installation is completed, the completion window appears.
10 Click [Exit].
ServerStart has been installed to the client computer.

Fujitsu Primergy RX100 S2 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S2
Category	Server
Language	English