Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

▶
"Connecting the power cord" on page 56
.
▶
"Switching on the server" on page 58.
Software configuration
To install the ESXi to the M.2 SSD, see "Software configuration" on
page 313.
15.7 Dual microSD 64GB Enterprise
15.7.1 Installing the Dual microSD 64GB Enterprise
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
"Shutting down the server" on page 45
.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 48.
▶
"Removing the air duct" on page 63.
System board and components
RX1330 M4 Upgrade and Maintenance Manual 317

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller