272 Maintenance Manual RX900 S1
Baseboard
Figure 170: Installing the TPM board
Ê Place the TPM board on the metal spacer (A) and socket (B) in figure 169
and fasten it with the Phillips screw.
14.4.4 Completing the task
Ê Perform the following procedures to complete the task:
1. Install the PCI Riser, see "Expansion cards and BBU" on page 105
2. "Closing the server" on page 47
3. "Mounting the server in the rack" on page 49
4. "Bringing the server back to operation" on page 51
5. "Closing the rack door" on page 51
To Next Page
Loading...
