Fujitsu PRIMERGY RX900 S1 - Inserting the Baseboard

72 Maintenance Manual RX900 S1
Power supply
Figure 27: Installing the power distribution board
Ê Insert the power distribution board in the baseboard (1).
Ê Connect the power cables to the baseboard (2).
Ê Fasten the captive screws (3).
Ê Close the cable clamps (4).
5.4.11 Inserting the baseboard
Figure 28: Inserting the baseboard
/
0
0
11
2
2
0
/
1
1