Fujitsu PRIMERGY RX900 S1 - Unlocking the HDD;SSD Module

82 Maintenance Manual RX900 S1
Hard disk and solid state drives
6.1.4 Unlocking the HDD/SSD module
Figure 35: Unlocking the 2.5-inch HDD/SSD module
Ê Release the locking mechanism as follows:
1. Press the two green tabs of the locking lever together (1).
2. Push the handle of the HDD/SSD module fully in the direction of the
arrow (2). The HDD/SSD module is now unlocked.
2
1