EasyManua.ls Logo

Fujitsu PRIMERGY RX900 S1 - Working with CDs;DVDs and CD;DVD drives

Fujitsu PRIMERGY RX900 S1
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34 Maintenance Manual RX900 S1
Safety instructions
Batteries
V CAUTION!
Incorrect replacement of batteries may result in a risk of explosion.
The batteries may only be replaced with identical batteries or with a
type recommended by the manufacturer (see the Technical Manual
for the system board).
Replace the lithium battery on the system board in accordance with
the instructions in the Maintenance manual.
The battery used in this device may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat about 100 °C (212F),
or incinerate the battery.
Working with CDs/DVDs and CD/DVD drives
When working with devices with CD/DVD drives, these instructions must be
followed.

Table of Contents

Related product manuals