U41057-J19-Z146-1-76 July 2004 02–TX150S2–27
Installation and initial operation Installation
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: P:\02-systemeinheiten\TX150S2\TX150S2-e\TX150S2-e.k02
Redundant power supply
Ê Connect each power supply module to a grounded power outlet with the
power cable supplied (1+2).
You will find the description of the indicatorsof the power supply module on page
02-TX150S2-36.
If you connect the two power cords to seperate power circuits, you can operate
the unit with power phase redundancy.
2
2
1
1
To Next Page
Loading...
