U41057-J19-Z146-1-76 July 2004 02–TX150S2–69
Diagnostics Troubleshooting
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: P:\02-systemeinheiten\TX150S2\TX150S2-e\TX150S2-e.k03
Troubleshooting
Power-on indicator remains dark after the switching-on
● Power cable not plugged correctly
Ê Make sure that the power cable is plugged correctly to the server and the
grounded power outlet.
Ê Check the cables which lead from the multiple AC socket to the power
supply units.
● Power supply overloaded
Ê Unplug the power plug of the server.
Ê Wait a few seconds and plug the power plug into the grounded power
outlet again.
Ê Switch on the server.
Server switches itself off
● Server Management has detected an error
Ê If it is possible to restart the server so that ServerView can be used:
check the error list in the program ServerView or the ErrorLog file and try
to correct the detected error.
Screen remains dark
● Monitor is switched off
Ê Switch on the monitor.
● Screen is blanked out
Ê Press any key on the keyboard.
or
Ê Set off the screen saver. Enter the reqired password.
● Brightness control is set to dark
Ê Set the brightness control of the screen to bright. For detailed infor-
mation, please refer to the operating manual supplied with the monitor.
To Next Page
Loading...
Need help?
General