U41057-J19-Z146-1-76 July 2004 02–TX150S2–9
General information Description
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: P:\02-systemeinheiten\TX150S2\TX150S2-e\TX150S2-e.k01
ServerView enables the management of all PRIMERGY servers in the network
via a central console. Here ServerView supports the following functions:
– Remote power-on (Wake On LAN)
– Intrusion Detection
– Temperature monitoring of the CPU and the surrounding area.
– Power monitoring
– Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
in the event of failure of memory modules or processors.
– End-of-Life monitoring of the fans with timely notification before a failure
– Watchdog timer for operating system monitoring and application monitoring
Further information on the ServerView server management is provided in the
associated documentation.
ServerStart
You can configure the PRIMERGY server quickly and purposefully with the
ServerStart software provided. User-guided menus are available for installing the
server operating systems.
Service and Support
PRIMERGY servers are service-friendly and modular, thus enabling quick and
simple maintenance. The flash EPROM program supplied with the FSC utilities
supports fast BIOS update BIOS update. With the optional Remote Test and
Diagnosis System RemoteView, long-distance maintenance and service (remote)
can also be performed on the servers of the PRIMERGY series. A RemoteView
service board S2(RSBS2) can be used in conjunction with RemoteView. Due to
this remote diagnosis for system analysis, remote configuration and remote
restart (also when the operating system failed or hardware failures appear) are
made possible.
To Next Page
Loading...
Need help?
General