Configuring ScanSnap Manager (for Windows Users)
105
■ ScanSnap's Communication Status
If you turn the ScanSnap ON/OFF when ScanSnap Manager is running, the pop-up balloon
notifies you of the communication status of the ScanSnap.
zWhen the ScanSnap is on
Power cable connection
USB bus power cable connection
zWhen the ScanSnap is off
When the time until auto power-off is specified, the pop-up balloon appears five minutes
before the ScanSnap turns off.
zWhen the ScanSnap will be automatically turned off soon
HINT
To disable notifications of the ScanSnap's communication status, click the pop-up balloon, and in the
[Status Display] tab of the [ScanSnap Manager - Preferences] dialog box that appears, clear the [Notify
of the communication status] check box.
To Next Page
Loading...
