Fujitsu Scan Snap S1300i User Manual

Configuring ScanSnap Manager (for Mac OS Users)
290
■ How to Configure Scan Settings
You can configure scan settings in the ScanSnap setup window depending on your intended
use in the following procedure.
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu"
(page 273).
D The ScanSnap setup window appears.
2. Click the [Detail] button to switch to the detail view mode.
zUsing the Quick Menu
zWithout Using the Quick Menu
HINT
You can also open the ScanSnap setup window by pressing simultaneously the [command ( )] and
[S] keys on the keyboard. This operation is only enabled when ScanSnap Manager is active (when
"ScanSnap Manager" is displayed in the menu bar).
HINT
The ScanSnap setup window retains the display status from the last time the ScanSnap was used.
For example, if it was closed in detail view mode, the window is displayed in detail view mode next
time you open it.
Outline view Detail view
Outline view
Detail view

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power