Fujitsu Scan Snap S1300i User Manual

How to Perform a Scan (for Mac OS Users)
276
How to Perform a Scan
This section explains how to perform scanning with the ScanSnap.
■ Preparation
1. Turn on the computer.
D The ScanSnap Manager icon appears in the Dock when Mac OS starts up.
2. Open the ADF paper chute (cover) of the ScanSnap to turn the power on.
D The ScanSnap Manager icon changes from to .
There are two ways to perform scanning, either with the Quick Menu or without using the
Quick Menu. For details, refer to the following:
z Using the Quick Menu (J page 277)
z Without Using the Quick Menu (J page 282)
HINT
z If the ScanSnap Manager icon is not displayed, select [Applications] and double-click
[ScanSnap] J [ScanSnap Manager] from Finder to start up ScanSnap Manager.
z If ScanSnap Manager does not automatically start when Mac OS starts up, select [Users &
Groups] ([Accounts] on Mac OS X v10.6 or earlier) J [Current User] ([My Account] on Mac OS X
v10.6 or earlier) J [Login Items] J [] J[ScanSnap] J [ScanSnap Manager] in the [System
Preferences] window to start up ScanSnap Manager.
HINT
There may be a slight delay before the ScanSnap Manager icon changes to depending on your
computer's performance, operating environment and load such as when multiple programs are
running at the same time.
ADF paper chute (cover)

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power