Fujitsu Scan Snap S1300i User Manual

ScanSnap Manager Icon and Operations (for Windows Users)
71
■ Right-Click Menu
This menu appears when you right-click the ScanSnap Manager icon .
Item Function
Duplex Scan Scans both sides of the document. Follows the settings configured in [Scan
Button Settings].
Simplex Scan Scans only one side of the document. Follows the settings configured in [Scan
Button Settings].
Scan Button Settings Displays the ScanSnap setup dialog box.
You can configure the scan settings in this dialog box.
D "How to Configure Scan Settings" (page 89)
Profile Management Displays the [ScanSnap Manager - Profile Management] dialog box.
You cannot select [Profile Management] when the [Use Quick Menu] check box
is selected in the ScanSnap setup dialog box.
D "Profile Management" (page 93)
ScanSnap Folder
Settings
Displays the ScanSnap setup dialog box.
You can configure the scan settings for using ScanSnap Folder in this dialog box.
D "How to Configure Scan Settings" (page 233)
Show scanning
results
After scanning is completed, a message appears to inform you whether blank
pages are removed or the image is rotated.
Check consumable
status
Displays the [ScanSnap Manager - Check consumable status] dialog box.
You can reset the consumable counters after replacing the consumables.
D "Consumables" (page 451)
Right-click

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power