Fujitsu Scan Snap S1300i User Manual

How to Perform a Scan (for Mac OS Users)
282
■ Without Using the Quick Menu
The following explains the procedure for scanning without using the Quick Menu.
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu"
(page 273).
D The ScanSnap setup window appears.
2. Clear the [Use Quick Menu] checkbox.
3. Select a profile.
Select a profile from either of the following:
z [Profile] pop-up menu in the ScanSnap setup window
z Profile menu

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power