Scanning Operation Flow
36
Scanning Operation Flow
This section explains the flow of operations for scanning documents.
You can scan documents in two different ways. Choose either way depending on your
intended use.
zUsing the Quick Menu
With the Quick Menu, even the first time users can easily use each ScanSnap function
by following the instructions on the screen and perform scanning.
After scanning, select an application to link with ScanSnap Manager in the Quick Menu.
For details about how to perform scanning using the Quick Menu, refer to the following:
- For Windows (J page 75)
-For Mac OS (J page 277)
zWithout Using the Quick Menu
You can perform scanning by using predefined scan settings.
Before you perform scanning, select a profile which is already configured with an
application to link with ScanSnap Manager. Documents are scanned according to the
scan settings of the selected profile.
For details about how to perform scanning using the Quick Menu, refer to the following:
- For Windows (J page 81)
-For Mac OS (J page 282)
HINT
z The above scanning methods can be switched by selecting or clearing the [Use Quick Menu] check box
in the ScanSnap setup dialog box/window.
Display the ScanSnap setup dialog box/window in the following procedure:
Right-click the ScanSnap Manager icon or on the taskbar, and select [Scan Button Settings].
Click the ScanSnap Manager icon or in the Dock while pressing the [control] key on the
keyboard, and select [Settings].
z ScanSnap Folder can also be used to scan documents. For details, refer to "ScanSnap Folder
Operations" (page 232).
To Next Page
Loading...
Need help?
General
