Fujitsu Scan Snap S1300i User Manual

Cleaning the Outside of the ScanSnap
445
Cleaning the Outside of the ScanSnap
Clean the outside of the ScanSnap in the following procedure.
How to perform cleaning
1. Unplug the cables from the ScanSnap.
2. Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened
with Cleaner F1/mild detergent.
ATTENTION
z Never use paint thinner or any other organic solvents.
z Be careful not to get any moisture or water inside the scanner during cleaning.
z It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth
with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts.
Mild detergent of
Cleaner F1
Cloth
Thinner

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power