Fujitsu Scan Snap S1300i User Manual

Actions (for Windows Users)
138
5. Check the scanned image in the preview area.
In the [Scan to Picture Folder] dialog box, you can rename the file, change the
destination folder, and save the scanned image in the folder specified for [Image saving
folder].
For details about the [Scan to Picture Folder] dialog box, refer to the ScanSnap
Manager Help.
6. Click the [Save] button.
D The scanned image is saved in the Pictures folder.
HINT
In [Specify destination folder], you can change the destination folder for the image data to a folder
other than the Pictures folder.
ATTENTION
z You cannot start scanning after the Quick Menu is displayed and before the [Scan to Picture
Folder] dialog box is closed. Close the [Scan to Picture Folder] dialog box before scanning the
next document.
z Do not move, delete, or rename scanned image in other applications after the Quick Menu is
displayed and before the [Scan to Picture Folder] dialog box is closed.
Preview

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power