Fujitsu Scan Snap S1300i User Manual

Configuring ScanSnap Manager (for Mac OS Users)
292
z [Paper] tab
- Paper size of documents (paper size selection)
- Whether to detect multifeed
z [Compression] tab
- File size of the scanned image (compression rate)
4. Click the [Apply] button.
D When you use the Quick Menu, scan settings for the [Customize] button are
changed.
D When you do not use the Quick Menu, scan settings for the currently selected profile
are changed.
ATTENTION
Scan settings vary depending on the scanning method.
For details about items that can be set, refer to "Setting Items With/Without the Quick Menu" (page
478).
HINT
If you press the [Scan] button on the ScanSnap while the ScanSnap setup window is displayed, the
ScanSnap setup window closes and scanning starts. Scan setting changes made up to this point are
saved and documents are scanned by these settings.
Note that when other windows are open, scanning does not start even if you press the [Scan] button
on the ScanSnap unless open windows are closed.

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power