Fujitsu Scan Snap S1300i User Manual

Actions (for Mac OS Users)
360
5. Connect to the computer from your mobile device.
For details about how to connect to the computer from your mobile device, refer to the
ScanSnap Connect Application User’s Guide for your mobile device.
D When the connection is established, the [Scan to Mobile] window appears showing
the mobile device that is currently connected to the computer. Then, the scanned
image is sent to the mobile device.
6. Click the [Close] button to close the [Scan to Mobile] window when
sending of the scanned image is completed.
HINT
z When you select the [Wait until the [Send] button is clicked] checkbox in the [Scan to Mobile -
Basic] window, the [Send] button appears in the [Scan to Mobile] window. Click the [Send] button
to send the image to the mobile device.
z For details about the features of ScanSnap Connect Application for mobile devices and how to
use it, refer to the ScanSnap Connect Application User's Guide for your mobile device.
HINT
The [Scan to Mobile] window closes automatically when the mobile device is disconnected from the
computer.

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power