Fujitsu Scan Snap S1300i User Manual

Cloud Services (for Mac OS Users)
377
Using the Quick Menu
1. Load a document in the ScanSnap.
For details about how to load documents, refer to "How to Load Documents" (page 33).
2. Press the [Scan] button on the ScanSnap to start a scan.
D The Quick Menu appears when the scanning is completed.
3. Change the settings for [Scan to Evernote (Document)] (If you do not
want to change any settings, go to step 4.).
1. Move the mouse cursor to the [Scan to Evernote (Document)] icon , and
then click [Settings].
DThe [Scan to Evernote (Document) - Options] window appears.
2. Change the settings.
For details about the [Scan to Evernote (Document) - Options] window, refer to the
ScanSnap Manager Help.
3. Click the [OK] button to close the [Scan to Evernote (Document) - Options] window.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] checkbox in the ScanSnap setup
window.
For details about how to perform scanning by using the Quick Menu, refer to "Using the Quick Menu" (page
277).

Fujitsu Scan Snap S1300i Specifications

General

Optical Resolution	600 dpi
ADF Capacity	10 sheets
Interface	USB 2.0
Color Depth	24-bit
Duplex Scanning	Yes
Scanning Method	CIS (Contact Image Sensor)
Scanner Type	Sheetfed
Max Document Size	A4
Scan Speed	12 ppm (simplex), 24 ipm (duplex)
Dimensions	284 x 99 x 77 mm
Weight	1.4 kg
Supported Operating Systems	Windows, macOS
Power Source	USB Bus Power