To Next Page

To Previous Page

l A firewall alert may be displayed. When the alert is displayed, click [Allow access] or

[Unblock] buttons to continue processing.

2. Connect to the computer from your mobile device.

For details about connecting to the computer from your mobile device, refer to the ScanSnap

Connect Application User's Guide for your mobile device.

a When the connection is established, the [Scan to Mobile] window appears showing the

mobile device that is currently connected to the computer. Then, the scanned image is sent

to the mobile device.

HINT

When you select the [Wait until the [Send] button is clicked] checkbox in the [Scan to Mobile -

Basic] window, the [Send] button appears in the [Scan to Mobile] window. Click the [Send] button

to send the image to the mobile device.

3. Click the [Close] button to close the [Scan to Mobile] window when sending

of the scanned image is completed.

HINT

The [Scan to Mobile] window closes automatically when the mobile device is disconnected from

the computer.

Saving Data to a Mobile Device

Fujitsu ScanSnap User Manual

Other manuals for Fujitsu ScanSnap