Fujitsu XG0224 - Ether Vlan Tag

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
101
5.1.1.9 ether vlan tag
Function Set the tagged VLAN.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax ether <number> vlan tag <tagged_vidlist>
Options
<number>
•
ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<tagged_vidlist>
•
Tagged VLAN ID list
Set a tagged VLAN ID.
When setting multiple IDs, separate them with commas (,).
Use Mode Configuration mode (admin class)
Explanation Set a tagged VLAN ID.
Caution To add a VLAN, specify the VLAN ID list including already registered VLANs.
The M1 port internally uses maximum VLAN ID in unused.
Therefore, the communication of the M1 port is temporarily interrupted when VLAN ID
allocated in the M1 port is specified by the vlan tag command, and the TCP session is
cut. (Only XG2600)
Default N/A