Chapter 3
Installation
This chapter describes the installation procedures for the device.
3.1 Workflow for Initial Setup of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
3.1.1 Configure LAN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.1.2 Telnet Connection via the LAN Interface (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.1.3 SNMP Configuration (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Reference
Refer to "chapter 2 Using the CLI", p. 37, for details on using the CLI.
Refer to "chapter 5 Command Reference", p. 85, for details on commands.
To Next Page
Loading...
