Fujitsu XG0224 - Vlan Ip6 Qos Aclmap Move

XG Series User's Guide Chapter 5 Command Reference
VLAN Information Settings
183
5.3.4.4 vlan ip6qos aclmap move
Function Change the priority of IPv6 QoS for VLAN
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR
Syntax vlan <vid> ip6qos aclmap move <count> <new_count>
Options
<vid>
•
VLAN ID
Specify the VLAN ID with a decimal value from 1 to 4094
<count>
•
Priority
Specify the priority with a decimal value
<new_count>
•
New Priority
Specify the new priority with a decimal value
Use Mode Configuration mode (admin class)
Explanation Change the priority of IPv6 QoS definition per VLAN
If the current priority is set as <count>, change the priority of this definition to
<new_count>. When the definition is changed, the priority is renumbered.
Default N/A
Range Model
0 to 511 XG0224 / XG0448 / XG0440DC / XG0440DCR