Fujitsu XG0224 - Saving;Restoring Configuration Information Using a Compact Flash Card

XG Series User's Guide Chapter 6 Managing the Device
Saving/Restoring Configuration Information
583
6.2.2 Saving/restoring configuration information using a
Compact Flash Card
You can save the device’s configuration information on a CompactFlash card. If necessary, you can also restore the
configuration information saved on a CompactFlash card.
z Configuration information which can be saved
• Configuration information 1 : config1
• Configuration information 2 : config2
The following explains how to save/restore configuration information using a CompactFlash card.
Saving configuration information using a Compact Flash Card
The following explains how to save the configuration information of this device to a CompactFlash card.
1. Insert a CompactFlash card on which you will save configuration information into the CompactFlash
card slot of this device.
2. Save the configuration information to the CompactFlash card.
z Example
The following example saves configuration information 1 to the config1-1 file.
Note
Be sure to restart the device to so that the restored configuration information can take effect.
Enter "get reset" as a subcommand for the ftp command to restart.
To switch the configuration information, enter "get reset1" or "get reset2" and restart the device.
• When "get reset" is entered : The current configuration information takes effect after restart.
• When "get reset1" is entered : Configuration information 1 takes effect after restart.
• When "get reset2" is entered : Configuration information 2 takes effect after restart.
AvailableModel
XG0224
# copy config1 /cf0/config1-1