Fujitsu XG0224 - Show Ip Route Summary

XG Series User's Guide Chapter 5 Command Reference
Routing Table Entry Display Commands
449
5.26.1.2 show ip route summary
Function Display the number of routing table information entries.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax show ip route summary [all]
Options
N/A
Display the number of route information sets that have been registered on the routing
table.
all
Display the number of all route information sets including route information not registered
on the routing table.
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the number of routing table information entries that routing manager registered.
Execution Example
Display of the number of route
1) Route Source
The routing protocol type is displayed.
Static : Indicates the static route information.
Connected : Indicates the interface route information.
2) Networks
The number of route is displayed.
# show ip route summary
Route Source Networks
------------ --------
(1) (2)
Static 3
Connected 7
Total 10