Fujitsu XG0224 - Syslog Security; Syslog Dupcut

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
288
5.15.2.5 syslog security
Function Set the security to output the system log information.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax syslog security <securetype>
Options
<securetype>
•
Security type
Select one of the followings to output the security log information.
When specifying multiples, separate them with commas (,).
proxydns : Specify it when the Proxy DNS module is subject to output.
none : Specify it when all modules are out of subject to output.
Use Mode Configuration mode (admin class)
Explanation Specify the security used to output the system log information.
Default It is assumed all options have been specified.
5.15.2.6 syslog dupcut
Function Set the duplicated message output of system log information.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax syslog dupcut <cut>
Options
<cut>
•
yes
Do not output the previous output message if duplicated.
• no
Output all messages without checking for duplication.
Use Mode Configuration mode (admin class)
Explanation Specify whether to output a message, which was duplicated with the previously output
message, to the system log.
Default It is assumed that duplication check is not performed.
syslog security proxydns
syslog dupcut no