Fujitsu XG0224 - Ether Description

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
110
5.1.1.19 ether description
Function Define the text description for a ether port
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax ether <number> description <description>
Options
<number>
•
The Ethernet port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<description>
•
Description
Define the description for a ether port with up to 50 characters from 0x21, 0x23 to 0x7e
of ASCII code.
Use Mode Configuration mode (admin class)
Explanation Defines the description text for each ether port.
Caution This description is used also for the SNMP agent function.
The SNMP agent function sets this description to ifAlias MIB (OID:1.3.6.1.2.1.31.1.1.1.18).
Default No ether port descriptions are defined.