Fujitsu XG0224 - Show System Status

XG Series User's Guide Chapter 5 Command Reference
System Operations and Display Commands
360
6) ASIC Firm Ver. (XG2600 Only)
Displays the ASIC firmware version number in the yymmddPLn format.
yymmdd is indicated by date (year-month-day).
PLn shows patch level and n is indicated by digit decimal value.
7) Firm Ver.
Displays the firmware version number in the Vxx.yy format.
"xx.yy is indicated by a two-digit decimal value.
8) Startup-config
Displays the date and time when you have saved the configuration to be read
during device startup, as well as the file name.
9) Running-config
Displays the date and time, when you applied the configuration that is currently
active.
10) MAC
Displays the MAC address with a 12-digit hexadecimal value.
11) Memory
Displays the memory size installed in the device.
5.18.1.2 show system status
Function Display the system status.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax show system status
Options
N/A
Display the system status.
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the dynamic system information of the device.
Execution Example
XG0224
When no Expansion Card is installed.
# show system status
Current-time : Wed Dec 10 06:07:43 2008 ---(1)
Startup-time : Wed Dec 10 06:05:05 2008 ---(2)
restart_cause : power on ---(3)
machine_state : RUNNING ---(4)
power0_state : NORMAL ---(5)
fan0_state : NORMAL ---(6)
inspiration_state : NORMAL ---(7)
phy_state : NORMAL
slot1_state : UNKNOWN
inspiration_temp : 26 C ---(8)
phy_temp : 40 C
slot1_temp : -- C
Slot Information
slot1 : NO_PRESENT ---(9)