Fujitsu XG0224 - Ether Macfilter Move

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
138
5.1.5.2 ether macfilter move
Function Change the priority of MAC filter.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax ether <number> macfilter move <count> <new_count>
Options
<number>
•
ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<count>
•
Source priority
Set the source priority with a decimal value.
<new_count>
•
Destination priority
Set the destination priority with a decimal value.
Use Mode Configuration mode (admin class)
Explanation Change the priority of MAC filtering for each Ethernet port.
If the current priority is set as <count>, change the priority of this definition to
<new_count>.
When the definition is changed, the priority is renumbered.
Default N/A due to an edit command.
Range Model
0 to 511 XG0224 / XG0448 / XG0440DC / XG0440DCR
0 to 63 XG2600