Fujitsu XG0224 - Ether Snmp Trap Linkup

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
152
5.1.9.2 ether snmp trap linkup
Function Enable/disable a linkup trap for a specified ether port.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax ether <number> snmp trap linkup <mode>
Options
<number>
•
ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
Enable or disable linkup trapping for the specified port(s).
• enable
Enable trapping.
• disable
Disable trapping.
Use Mode Configuration mode (admin class)
Explanation Enable or disable the linkup trap for the specified ether port(s).
Caution The "snmp trap linkup" command has a priority over this command.
Default It is assumed that the linkup trap is enabled.
ether <number> snmp trap linkup enable