Fujitsu XG0224 - Snmp Trap Newroot; Snmp Trap Topologychange

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
273
5.15.1.12 snmp trap newroot
Function Set the newRoot trap.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax snmp trap newroot <mode>
Options
<mode>
Specify whether to enable or disable trapping.
• enable
Enable trapping.
• disable
Disable trapping.
Use Mode Configuration mode (admin class)
Explanation Set whether to enable or disable the newRoot trap.
Default It is assumed that the newRoot trap is enabled.
5.15.1.13 snmp trap topologychange
Function Set the topologyChange trap.
Available Model XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax snmp trap topologychange <mode>
Options
<mode>
Specify whether to enable or disable trapping.
• enable
Enable trapping.
• disable
Disable trapping.
Use Mode Configuration mode (admin class)
Explanation Set whether to enable or disable the topologyChange trap.
Default It is assumed that the topologyChange trap is enabled.
snmp trap newroot enable
snmp trap topologychange enable