XG Series User's Guide Chapter 5 Command Reference
ACL Information Settings
241
• TOS value
Specify the TOS value used to identify the ACL target with a hexadecimal value from 0
to ff.
• DSCP value
Specify the DSCP value used to identify the ACL target with a decimal value from 0 to
63.
Use Mode Configuration mode (admin class)
Explanation Specify the IPv4 packet pattern in the ACL definition.
Caution Make sure to define the acl ip when using L3 protocols such as TCP, UDP, or ICMP.
Default Any IP packet pattern can be specified in the ACL definition.
(The ACL definition is disabled if "all any" is specified or undefined.)
To Next Page
Loading...
