XG Series User's Guide Chapter 1 Features and Functions
Software Specifications
36
*1) Includes own entries of the device and static entries.
*2) Includes system use of VLANs (number of ether ports + 1).
*3) First, the maximum number of neighbor LLDP device information is 15 times of the number of total ports including
1G and 10G. (XG0224: 390, XG0448: 780, XG0440DC,XG0440DCR: 660, XG2600: 390)
Second, each port including 1G and 10G must have at least one LLDP information. (XG0224: 26, XG0448: 52,
XG2600: 26)
The remaining number of neighbor LLDP device information can be distributed to any ports. (XG0224: 364,
XG0448: 728, XG0440DC,XG0440DCR: 616, XG2600: 364)
*4) Total number of MAC filter (IPv4) and IPv4 filter definitions.
*5) Total number of MAC filter (IPv6) and IPv6 filter definitions.
*6) Total number of Rewrite the priority (IPv4) and IPv4 DSCP rewrite definitions.
*7) Total number of Rewrite the priority (IPv6) and IPv6 DSCP rewrite definitions.
*8) The total number of MAC filter, IPv4 filter, MAC QoS and IPv4 DSCP rewrite definitions may be reduced as the
number of ACL rules increase.
*9) Same port can't be used as a target port for tx and for rx.
*10) Includes Management Port Interface (oob).
*11) 4 sessions for Telnet, 1session fot WWW (http), 1session for console, 1session for ftp, 1session for ssh (sftp).
To Next Page
Loading...
