Fujitsu XG0224 - Page 397

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
397
C1 is connected with C3. C2 is connected with c4.
Caution The statistics are cleared if this device is restarted.
Execution Example
Example of executing XG0224
#show ether statistics line 1
[ETHER PORT-1 STATISTICS]
[Input Statistics]
Octets : 0 ---(1)
bits/sec : 0 ---(2)
Frames : 0 ---(3)
frames/sec : 0 ---(4)
Unicast : 0 ---(5)
frames/sec : 0 ---(6)
Multicast : 0 ---(7)
frames/sec : 0 ---(8)
Broadcast : 0 ---(9)
frames/sec : 0 ---(10)
Pause frames : 0 ---(11)
Discards
All DiscardsPkts : 0 ---(12)
Errors
Undersize : 0 ---(13)
FCSErrors : 0 ---(14)
AlignmentErrors : 0 ---(15)
FragmentErrors : 0 ---(16)
Jabbers : 0 ---(17)
SymbolErrors : 0 ---(18)
UnknownOpcodes : 0 ---(19)
[Output Statistics]
Octets : 0 ---(20)
bits/sec : 0 ---(21)
Frames : 0 ---(22)
frames/sec : 0 ---(23)
Unicast : 0 ---(24)
Multicast : 0 ---(25)
frames/sec : 0 ---(26)
Broadcast : 0 ---(27)
frames/sec : 0 ---(28)
Pause frames : 0 ---(29)
Discards
DelayExceededDiscards : 0 ---(30)
Queue Full Discards : 0 ---(31)
Errors
FCSErrors : 0 ---(32)
FragmentErrors : 0 ---(33)
CarrierSenseErrors : 0 ---(34)
ExcessiveCollisions : 0 ---(35)
LateCollisions : 0 ---(36)
SingleCollisionFrames : 0 ---(37)
MultipleCollisionFrames : 0 ---(38)
DeferredTransmissions : 0 ---(39)