Fujitsu XG0224 - Page 427

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
427
Execution Example (XG2600)
1) Port : Ethernet physical port number
The management port is displayed with M1. (Only XG2600)
An "internal connected port" is displayed with C1-C4. (Only XG0448)
2) TX/sec : Number of frames that were sent in 1 second (pps)
3) Util : Sending usage ratio (%) of physical port
4) RX/sec : Number of frames that were received in 1 second (pps)
5) Util : Receiving usage ratio (%) of physical port
# show ether utilization
Port TX/sec Util RX/sec Util
------ ---------- ------- ---------- -------
(1) (2) (3) (4) (5)
1 0 0 0 0
2 0 0 0 0
3 0 0 0 0
4 0 0 0 0
5 710227 50 0 0
6 0 0 0 0
7 0 0 0 0
8 0 0 0 0
9 0 0 0 0
10 0 0 0 0
11 0 0 0 0
12 0 0 0 0
13 0 0 1420457 100
14 0 0 0 0
15 1420454 100 0 0
16 0 0 0 0
17 0 0 0 0
18 0 0 0 0
19 0 0 0 0
20 0 0 0 0
21 0 0 0 0
22 0 0 0 0
23 0 0 0 0
24 0 0 0 0
25 0 0 0 0
26 0 0 0 0
M1 0 0 0 0
#