XG Series User's Guide Chapter 5 Command Reference
Effect by "commit" Command Execution
562
(0)
The settings are enabled immediately after the command has been executed.
(1)
Only the relevant function is stopped or restarted.
Management LAN port oob ip address (1):XG2600
oob ip route (1):XG2600
oob ip6 use (1):XG2600
oob ip6 ifid (1):XG2600
oob ip6 address (1):XG2600
oob ip6 ra mode (1):XG2600
oob ip6 route (1):XG2600
oob llmnr use (1):XG2600
IP ip arp age (1)
QoS qos cosmap (4):XG0224 / XG0448 /
XG0440DC / XG0440DCR
STP stp (1) *3
LLDP lldp (1)
Loop Detect loopdetect (1)
ACL acl (6)*6:XG2600
(1):XG0224 / XG0448 /
XG0440DC / XG0440DCR
AAA aaa (1)
Device snmp (1)
syslog (1)
time (1)
proxydns (1)
host (1)
password format (0)
password admin set (0)
password user set (0)
password aaa (1)
password authtype (1)
schedule (1)
resource (4):XG0224 / XG0448 /
XG0440DC / XG0440DCR
watchdog service (4)
consoleinfo (1)
telnetinfo (1)
mflag (1)
dumpswitch (1):XG0224 / XG0448 /
XG0440DC / XG0440DCR
sysname (4)
serverinfo (1)
Login banner login banner telnet (1)
login banner ftp (1)
login banner ssh (1)
login banner description (1)
Type Command Name Effect of "commit"
To Next Page
Loading...
