FC4 / FC4 Ex (HS) connected with Mobility Server
31
GB
Basic rules for operation
Handset operation involves some functions which occur quite frequently.
Make yourself familiar with these functions.
Switching on the Business Handset
The handset is Off. Press the right softkey long.
Switching off the Business Handset
The handset is in its basic condition (idle display). Press the left
softkey long.
Left and right softkey
The functions of the softkeys change, depending on the situation. The
current function is always shown in the display above the key, e.g. [Menu]
or [End call].
The right softkey serves for switching on the handset and for calling
up the function shown above the softkey, e.g. for calling up the main
menu.
The left softkey serves for switching off the handset and for calling
up the function shown above the softkey, e.g. for ending a
connection or for returning to the previous display.
When you are in a menu and press the left softkey long, the
handset goes to the basic condition (idle display).
Number keys
From the basic condition (idle display), pressing any number key will start
a dialling process.
Coloured number keys
The coloured number keys serve for quick selection of a sub-menu while
you are in a menu with coloured icons, e.g. in the main menu.
In that case, the four coloured number keys have the following function:
To Next Page
Loading...