Funkwerk FC4 - Phone settings; Audio settings > ring tone melody

FC4 / FC4 Ex (HS) connected with Mobility Server
52
GB
Phone settings
Audio settings > ring tone melody
Call up Menu > Setup > Phone settings.
O K
Select the «Audio settings» entry and call it up with the right
softkey [OK].
(
O K
) If necessary, select the «Ring tone melody» entry. Call up the
selected «Ring tone melody» entry with the right softkey [OK].
O K
Select entry for «external calls» or for «internal calls» and call it up
with the right softkey [Change]. You hear the current melody.
O K
or
O K
Using the Up and Down arrows of the selector key, select one of
the 20 ring tone melodies.
Accept the new ring tone melody with the right softkey [OK].
Go back one level to the audio settings by briefly pressing the left
softkey or go back to the basic condition by pressing the left softkey
long.
6 1 2
When you require a very loud call signalling – e.g. in a loud working
environment – we recommend using the ring tone melody
«klingel08» at maximum ring tone volume. Check the signalling
settings as well. The call tone of the desired signalling for internal or
external calls must be activated and must not be set to the „ring
tone short“ (short call tone). See Menu > Setup > Phone settings >
Audio settings > Signalling.
Audio settings > ring tone volume
Call up Menu > Setup > Phone settings.