FC4 / FC4 Ex (HS) connected with Mobility Server
51
GB
Adapting the handset to your requirements
In the sections ‘Phone settings’, ‘System settings’, ‘Security settings’ and
‘Extras’, you can find information about the settings of your handset and of
the Mobility Server. These settings allow adapting the handset to your
requirements.
If you have to make settings on several handsets, we recommend using
the ‘Configuration Tool’. This tool is an application program including a
MEM card adapter which can be used for editing configuration data as well
as the phonebook entries on the handset MEM card comfortably on the
PC. Please contact our sales department if you are interested.
The descriptions below regarding the changes of settings always
start from the basic condition (idle display) of the switched-on
handset.
The first two phone settings are deliberately explained in detail in
order to make you more familiar with handset operation. The other
settings are explained with a smaller degree of detail.
The order in which the settings are described in this manual is in
line with the menu structure.
For your orientation, the annex includes an overview of this menu
structure.
When a setting (a function or a feature) cannot be edited, please
contact the system administrator of the telephone system. Some
functions must be enabled before they can be used in the telephone
system.
To Next Page
Loading...