2.3 SMS Password
2-11
2. Enter the SMS menu for the Handset
When you wish to enter the SMS menu from each Handset, enter the password you had
set via Settings -> SMS server setting to log into the SMS menu.
As in the case for the Web MMI, if you place a tick for “Save password” upon the
password input screen, you will be able not to be requested for the SMS password every
time you open the SMS menu.
When you wish to restore the setting to be requested for the SMS password, open;
SMS -> 6. Setting -> 2. Password, and remove the tick for “Save password”.
2.3.2 Changing the SMS Password
Open SMS server setting from the Setting menu, and enter both the current password
and the new password. The new password is common for all Handsets and each Web
MMI.
Make sure not to forget the new password. To restore the setting to the default
value, you will need to initialize the Communication control unit.
Execute; Settings -> Initialize -> Initialize except connection setting.
To Next Page
Loading...
Need help?
General
