EasyManua.ls Logo

Furuno FELCOM 250

Furuno FELCOM 250
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix 3. Specifications
AP3-3
AP3.2 FELCOM-250
1. GENERAL
1.1 Transmit frequency 1626.5 MHz to 1660.5 MHz
1.2 Receiving frequency 1525.0 MHz to 1559.0 MHz
1.3 Channel interval 1.25 kHz
1.4 G/T Better than -15.5dB/K
1.5 EIRP 15.1 dBW
2. ANTENNA UNIT
2.1 Antenna type Patch array antenna
2.2 Gain Greater than 11.0dBi
2.3 Axial ratio Less than 4.0dB
2.4 Antenna beam width 50° approx. (at -3 dB)
2.5 Stabilization Three-axis control
2.6 Positioning Az: 0° to 360°, El: 5° to 90°
2.7 Position accuracy Within 0.6dB (95% time)
2.8 Tracking Electrical beam tracking system
3. COMMUNICATION UNIT
3.1 Communication services
Voice 4 kbps AMBE+2 or ISDN3.1 kHz audio*
Data Standard IP 284 kbps (Best effort)
Standard IP Data Up link: 239 kbps,
Down link: 284 kbps (Best effort)
Streaming IP Data 8, 16, 32, 64, 128 kbps (QoS)
Short message service Up to 160 characters
Facsimile Group 3 facsimile via 3.1 kHz audio*
3.2 Modulation QPSK, 16QAM
*: Voice and facsimile communications are available at satellite elevation
20° or more

Table of Contents

Other manuals for Furuno FELCOM 250

Related product manuals