Furuno FELCOM 250

To Next Page

To Previous Page



12.1 Updating the Communication Unit Software

12-2

1. Software Update Procedure



Fig. 12.1.1 Software updating procedure

Set 2 IP addresses

For normal mode:

192.168.1.2/255.255.255.0

For maintenance mode:

172.31.16.2/255.255.0.0

Set the IP address

For normal mode:

192.168.1.2/255.255.255.0

From the FelcomUpdate folder, open "FelcomUpdate.jar"

Click Update

Updating completed when Done

is dis

Start

updating

Install "Java" into the PC subject

for updating

Update CommUnit

(Hub, MODEM)

Update the

Handset

Update the Incoming

indicator

Select the software you wish to update

using the Radio button.

Start

updating

Other manuals for Furuno FELCOM 250