Furuno FELCOM 250 Service Manual

 2.4 Handling the Password
2-12
2.4 Handling the Password
2.4.1 List of Passwords
Table 2.4.1 List of passwords
Applied for;
User Name
/Password
(Default)
Notes
Calling Administrator's
mode from the Web MMI
(Administrator)
User name:
Admin
Password:
01234567
The password alone can be changed : Settings -> Change password
The menus of "Settings", "Log", "Device", and "Self test" are
added to the existing Navigation bar area menu of Main, SMS,
Contacts, and SIM.
Calling Service mode
from the Web MMI
(Service)
User name:
Service
Password:
fb5963
This cannot be changed.
"Service" menu is added to the Navigation bar area menu
described above.
SIM: PIN 1 Code
Described
upon the SIM
card
This can be changed from the Web MMI: SIM-> Change PIN
If you set Enable for SIM -> Pin Enable/Disable, you will be
required to input the PIN code when the power is turned on for
either the Web MMI or the Handset.
You will not be requested for the PIN code if you set this to
"Disable".
SIM: PUK1 Code
Described
upon the SIM
card
This cannot be changed.
When you have failed to enter the correct PIN code upon the Web
MMI or upon the Handset for consecutive 3 times, enter the PUK1
code.
You will be locked out if you fail to enter the PUK code for
consecutive 10 times.
SMS menu 01234567
This can be changed upon the Web MMI: Setting -> SMS server
setting
1. When you have placed a tick for [Save password] when you
have opened the SMS menu upon the Web MMI, you will not
be requested for the password to be entered from next time
you open the SMS menu.
2. When you have placed a tick for [Save password] when you
have opened the SMS menu upon the Handset, you will not
be requested for the password to be entered from next time
you open the SMS menu.
Note) The password is the same for other PCs or the Handsets.
Settings -> PBX
settings -> Extension ->
Add extension, and Edit
⎯
This can be changed.
Set a password consisted of 1 - 8 characters for each Handset.
You will need to register the same password to the Handset, too.
** Upon the Handset: Settings -> SIP -> Client set **
Settings -> WAN ->
Add connection, and Edit
⎯
This can be changed.
Whether you enter the password is optional. You can register the
Operation Passwords consisted of 8 characters at maximum for
each of the services and application for Standard IP Data and
each Streaming IP Data.
Once you register the passwords, you will be requested to enter
the password every time you connect and disconnect from the
service.
Note) The passwords are common between the PCs and Handsets.

Furuno FELCOM 250 Specifications

General

Brand	Furuno
Model	FELCOM 250
Category	Marine GPS System
Language	English