Appendix 2. Message List
AP2-1
AP2.1 Overview
1. Web MMI
The Error messages and Warning messages in FELCOM-250/500 will be displayed the
Web MMI; Main -> Error information. They will also be displayed in the Alarm display
area, too. When the events that were causing the messages are resolved, the messages
will be deleted automatically.
1,000 cases of Errors, Warnings, and Notices at maximum will be saved in the log
which can be reached via; Log -> Error Log in the Web MMI and they will not be
deleted even if the power is turned off.
Note that the same messages will be displayed in the Web MMI for other PCs, too.
Web MMI: Main -> Error Information screen
Exxxx:
Message No.
The block where the
error is occurred
Message
Alarm display;
When several events are occurred at the same time,
the priority between them is; SIM -> Error -> Warning.
Appendix 2. Message List
To Next Page
Loading...
Need help?
General
